Blue Robotics T200 Thruster with 3-pin Connector

Finally, a Blue Robotics T200 Thruster with a waterproof connector!

We take the wildly popular Blue Robotics T200 thruster and put our 3-pin Cobalt Series connector on the end of the cable.  All you need to do is install a matching 3-pin Cobalt Series bulkhead connector on your ROV (the Cobalt bulkhead connector fits in the same 10-mm hole as Blue Robotics penetrators).  The thruster has a 20-amp maximum continuous current.

Must be used with the 3-pin  Cobalt Series Bulkhead Connector (sold separately).  This thruster is NOT compatible with the 3-pin POWER bulkhead connector.