Thruster Cable Termination Kit
Use this inexpensive Termination Kit to add a Cobalt 3-pin connector to your T200 thruster!
This is similar to our Cable Termination Kit, but does not require the special Cable Termination Tool.
This is the most affordable way to add a waterproof connector to a Blue Robotics T200 Thruster! This uses the same reliable Cobalt 3-pin connector found in our Blue Robotics T200 Thruster with Cobalt Connector.
The kit includes:
- qty. 1. Connector Shell with pre-installed PEEK Insert
- qty. 3 Electrical Sockets
- qty. 1 Locking Sleeve
- qty. 1 #012 O-Ring
- qty. 1 3.2 mm x 25 mm (1/8” x 1”) Dowel Pin for installation of Sockets*
Must be used with a Cobalt 3-pin Bulkhead Connector (not included).
Similar to our Cable Termination Kits, but does NOT require the Cable Termination Tool.
Requires intermediate soldering skills as well as familiarity with potting techniques. Does not include potting material (we recommend 3M DP-420 or DP-620). Please read the Instructions in the DOWNLOADS tab for further detail.
*If you order multiple termination kits, we will include only one or two dowel pins, as they can be re-used.