DPC-11 Servo Programmer from Hitec

The Hitec DPC-11 Servo Programmer can be used to program optional features of the Hitec servos found inside our SER-201X and SER-202X underwater servos.  It cannot be used to program our SER-203X or SER-213X underwater servos.

 

It utilizes a computer interface so you will need a PC with the free downloadable software (see DOWNLOADS tab), a Mini USB to USB cable and a 4.8-6V battery to power the programmer. 

 

To attach the programmer to a SER-201X or SER-202X servo, you will also need to make an adapter cable with a 3-pin R/C servo connector on one end and a Cobalt 3-pin cable on the other end (see image).

 

Functions:

• Customize the parameters of SER-201X and SER-202X servos
• Test settings prior to servo installation
• Save and load servo parameter files and restore the factory default files

 

Driver Installation Tip:

 

Windows® 10/64 20H2 has been known to have issues with the DPC-11 driver installation. If your DPC-11 does not connect to your PC, perform the following instructions to correct the issue:

• Go to Windows Settings and select 'Update and Security'
• Select 'View Optional Updates' on the Windows Update page.
• On the Optional Updates page select the 'Drivers Update' drop down.
• Download and install the Silicon Labs Driver update for USBXpress.

Your DPC-11 should now connect to your PC.

 

More information on the DPC-11 can be found on Hitec's website.